Manualshelf

User Manual

ManualsBrandsADC Telecommunications ManualsElectronicsDigivance CXD 800 MHz A and B Band System
61626364656667686970
ADCP-75-192 • Issue 1 • December 2005 • Section 2: Description
Page 2-36
2005, ADC Telecommunications, Inc.
The RFA consists of an electronic component circuit board assembly and fan assembly that are
mounted within a sheet metal enclosure. The metal enclosure provides a mounting point for the
electronic components and controls RF emissions. Except for the fan assembly, the electronic
components are not user replaceable. All controls, indicators, and switches are mounted on the
RFA front panel for easy access. A carrying handle is provided on the front of the RFA to
facilitate installation and transport. A single-band 10 W RFA is shown in Figure 2-34.
Figure 2-34. Single-Band 10 Watt Radio Frequency Assembly (RFA)
7.6.1 Single-Band 10 Watt RFA
The single-band 10 Watt RFA user interface consists of various LED's, power,
communications and RF connectors. The RFA user interface is shown in Figure 2-35 and
described in Table 2-25.