User Manual

ADCP-75-192 • Issue 1 • December 2005 • Section 2: Description
Page 2-21
 2005, ADC Telecommunications, Inc.
(5) FAULT LED
(3) HOT SWAP
LE D
(4) P OWER LED
(1) DIF INP UT
LE D 1- 8
(2) DIF OUTP UT
LE D 1- 4
Figure 2-19. RSC Module
The DIF input and output LEDs describe the status of the digital signal. The RSC defaults to
using two 4:1 digital simulcast groups. To determine the relationship between the RSC channel
LED number and the signal type, use the guidelines in Table 2-13.
Table 2-13. RSC User Interface
REF
No.
USER INTERFACE
DESIGNATION
DEVICE FUNCTIONAL DESCRIPTION
1 DIF Input LED
1-8
Multi-colored LED
(Green/Yellow/Red)
Indicator showing if no input signal (off), good (green),
degraded (yellow), clock issue (blinking), or bad data on
channel (red).
IN 1: Band Sector Primary (1st Simulcast)
IN 2: Band Sector Primary (2nd Simulcast)
IN 3: Band Sector Primary (3rd Simulcast)
IN 4: Band Sector Primary (4th Simulcast)
IN 5: Band Sector Diversity (1st Simulcast)- if used
IN 6: Band Sector Diversity (2nd Simulcast)- if used
IN 7: Band Sector Diversity (3rd Simulcast)- if used
IN 8: Band Sector Diversity (4th Simulcast)- if used
2 DIF Output LED
1-4
Multi-colored LED
(Green/Yellow/Red)
Indicator showing if no input signal (off), good (green),
degraded (yellow), clock issue (blinking), or bad data on
channel (red).
OUT 1: Band Sector-Primary
OUT 2: Band Sector-Diversity- if used
OUT 3: Not Used
OUT 4: Not Used
continued