User's Manual

Installing the LGCell
9-6 LGCell 4.0 Installation, Operation, and Reference Manual PN 8100-40
620004-0 Rev. B
Connecting Power and Powering Up
After mounting the Main Hub in the rack, connect AC power. You may use multiple
outlet surge protectors for multiple Main Hubs.
1. Connect the AC power cord to the Main Hub (labeled 1 on the following figure).
2. Plug the power cord into an outlet providing AC power.
3. Flip the Main Hub’s power switch from position 0 to position 1 (labeled 2 on the
figure above.)
The front panel unit functionality LEDs,
POWER and SYNC, should be green (lit).
Installing an Optional Cable Manager in a Rack
• Fasten the cable manager to the rack, immediately above or below the Main Hub,
using screws.
AC POWER
LGCell
TM
Main Hub
SYNC
POWER
LINK
SYNC
STATUS
DOWN
UP
1
LINK
SYNC
STATUS
DOWN
UP
2
LINK
SYNC
STATUS
DOWN
UP
3
LINK
SYNC
STATUS
DOWN
UP
4
TO EXPANSION HUB PORTS