User's Manual

PN 8100-40 Help Hot Line (U.S. only): 1-800-530-9960 9-13
620004-0 Rev. B
Installing the Main Hub
Connecting a Simplex Base Station to the LGCell Duplex/Simplex Ports:
1. Connect an N-male to N-male coaxial cable to the transmit connector on the base
station.
2. Connect the other end of the N-male coaxial cable to the FORWARD simplex con-
nector on the Main Hub.
3. Connect an N-male to N-male coaxial cable to the receive connector on the base
station.
4. Connect the other end of the N-male coaxial cable to the DUPLEX connector on the
Main Hub.
Figure 9-4 Duplex Base Station to LGCell Main Hub
REVERSE FORWARD DUPLEX
DIAGNOSTIC 2 DIAGNOSTIC 1
Microcellular
N-male to N-male
Coaxial Cable
Base Station
Simplex
T1/E1 to
Mobile
Switching
Center
Insert attenuator, if needed
LGCell
Frequency/Format
Duplex Port
Gain (dB)
Simplex Port
Gain (dB)
800 MHz AMPS, TDMA 30 0
800 MHz CDMA 30 0
800 MHz iDEN 0 0
900 MHz GSM / EGSM 0 0
1800 MHz DCS/GSM 0 0
1900 MHz TDMA 40 0
1900 MHz CDMA 40 0
1900 MHz GSM 40 0