User's Manual Part 2

PN 8100-40 LGCell 4.0 Installation, Operation, and Reference Manual B-1
620004-0 Rev. E
APPENDIX B Compliance Information
All LGCell systems comply with Optical Fiber Safety Standard IEC/EN60825-2. The
LGCell distributed antenna system uses light emitting diodes (LEDs) and is rated as a
Class 1 optical hazard system. It has an absolute maximum output power of
–11.5 dBm at 1310 nanometers (nm). There are no restrictions on the location or use
of an LGCell system. No special precautions are required if standard work practices
are followed. Additional information on the safe use of optical fiber communications
systems is at the end of this appendix.
B.1 LGCell System Approval Status
Appendix B.1.1 through B.1.7 provide LGC Wireless’ LGCell system approval status
for various countries around the world. Some European countries require National
Type Approval to their national standards (such as Germany).
B.1.1 800 MHz Cellular
Telecom: FCC ID: NOO-DAS8-4-W
Hong Kong: Approval number: RF200110, based on the above FCC
approval
EMC: FCC Class A, Part 15, Subpart B
Safety: UL 1950 3rd
edition and the cUL mark for Canada
NEBS: This is a customer driven conformance certification and typically desired
of equipment that is intended to be installed in a Central Office environ-
ment. LGC products are intended as Customer Premise Equipment and it
is not anticipated that they will be installed in a Central Office environ-
ment, therefore NEBS conformance certification has not been pursued at
this time.