User's Manual Part 2

PN 8100-40 Help Hot Line (U.S. only): 1-800-530-9960 9-31
620004-0 Rev. E
Installing the Remote Access Unit
Connecting the UTP/STP Cable
Connecting UTP/STP to single band RAU:
Before connecting the UTP/STP cables, confirm that they meet TIA/EIA 568-A spec-
ifications.
Connect the UTP/STP cable coming from the Expansion Hub to the RJ-45 female
jack on the RAU, as shown in the following figure.
Connecting UTP/STP cable to dual band RAU:
• For the 900/1800 dual band RAU:
Connect the 900 MHz Expansion Hub cable to the top RJ-45 jack and the
1800 MHz cable to the bottom RJ-45 jack.
• For the 800/900 or 800/1900 dual band RAU:
Connect the 800 MHz Expansion Hub cable to the left RJ-45 jack and the
900 MHz or 1900 MHz cable to the right RJ-45 jack.
• For the 1800/1800 dual band RAU:
Connect the top (upper) 1800 MHz Expansion Hub cable to the RAU’s top RJ-45
jack, and connect the bottom (lower) 1800 MHz Expansion Hub cable to the
RAU’s bottom RJ-45 jack.