User's Manual
Table Of Contents
- interWave WaveNet Link CX User Manual
- One - System Description
- 1-1 General
- 1-2 System Overview
- 1-3 Features
- 1-4 LinkCX Basic Structure
- 1-4.1 Radio Links
- 1-4.2 Data Stream
- 1-4.3 LinkCX Models
- 1-4.4 Mounting and Antenna Alignment
- 1-4.5 Interface Connectors and Indicators
- 1-4.6 Cables
- 1-4.7 Integral Antenna
- 1-4.8 External Antenna
- 1-4.9 Configuration, Operation, and Monitoring
- 1-4.10 SNMP
- 1-4.11 LinkCX Network Management Architecture
- 1-4.12 NMS Connectivity
- 1-4.13 Web-Based GUI Access Security
- 1-4.14 GUI Functions
- 1-5 Typical Applications
- 1-5.1 Internet (ISP)
- 1-5.2 Private Network Wireless Bridged LANs and WANs
- 1-5.3 PCS/PCN and Cellular Networks
- 1-5.4 Wireless Local Loop Networks and Local Exchange Bypass
- 1-5.5 Business Bypass and Local Exchange Bypass
- 1-5.6 Backhaul for Wireless MTU and MTU Access
- 1-5.7 Wireless Mesh Backhaul Networks
- 1-5.8 Wireless ATM Mesh Distribution with StreamNet
- 1-6 Specifications
- Two - Installation Steering Guide
- Three - Installation Planning
- Four - Installing the Link CX
- Five - Final Link CX Setup
- Six - Monitoring and Trend Analysis
- Seven - Troubleshooting the Link CX
- Appendix 1 - Interface Cable Pinouts
- Appendix 2 - Technical Specifications
- Appendix 3 - Using the Web-Based GUI User Interface
- Appendix 4 - Grounding and Lightning Protection
- Appendix 4 - Enterprise MIBs and Traps
44 Link CX User Manual, Version A
12 On the Monitor page, select the link for the Commission Radio page. The web browser
displays the Commission Radio page, similar to the sample shown in Figure 4-4.
13 Using the data entered on the filled-out copy of the Radio Link Planning Worksheet from
Chapter Three, select the planned configuration choices available on this page, except the
final Tx Attenuation and the Automatic Tx Power Control values. Enable the Tx Attenuation
and disable the Automatic Tx Power Control for now.
14 Click Submit Changes to upload changes to the Link CX.
15 On the Commission Radio page, select the link for the Commission Interfaces page. The web
browser displays the Commission Manager Interfaces page, similar to the sample shown in
Figure 4-5.
16 Using the data entered on the filled-out copy of the Radio Link Planning Worksheet from
Chapter Three, select the planned configuration choices available on this page.
Figure 4-4 Typical 5.8 GHz Link CX Commission Radio Web Page
The Link CX is shipped with Tx Attenuation disabled. Enable Tx
Attenuation until the rest of the Link CX configuration steps are
completed.