User's Manual
Table Of Contents
- interWave WaveNet Link CX User Manual
- One - System Description
- 1-1 General
- 1-2 System Overview
- 1-3 Features
- 1-4 LinkCX Basic Structure
- 1-4.1 Radio Links
- 1-4.2 Data Stream
- 1-4.3 LinkCX Models
- 1-4.4 Mounting and Antenna Alignment
- 1-4.5 Interface Connectors and Indicators
- 1-4.6 Cables
- 1-4.7 Integral Antenna
- 1-4.8 External Antenna
- 1-4.9 Configuration, Operation, and Monitoring
- 1-4.10 SNMP
- 1-4.11 LinkCX Network Management Architecture
- 1-4.12 NMS Connectivity
- 1-4.13 Web-Based GUI Access Security
- 1-4.14 GUI Functions
- 1-5 Typical Applications
- 1-5.1 Internet (ISP)
- 1-5.2 Private Network Wireless Bridged LANs and WANs
- 1-5.3 PCS/PCN and Cellular Networks
- 1-5.4 Wireless Local Loop Networks and Local Exchange Bypass
- 1-5.5 Business Bypass and Local Exchange Bypass
- 1-5.6 Backhaul for Wireless MTU and MTU Access
- 1-5.7 Wireless Mesh Backhaul Networks
- 1-5.8 Wireless ATM Mesh Distribution with StreamNet
- 1-6 Specifications
- Two - Installation Steering Guide
- Three - Installation Planning
- Four - Installing the Link CX
- Five - Final Link CX Setup
- Six - Monitoring and Trend Analysis
- Seven - Troubleshooting the Link CX
- Appendix 1 - Interface Cable Pinouts
- Appendix 2 - Technical Specifications
- Appendix 3 - Using the Web-Based GUI User Interface
- Appendix 4 - Grounding and Lightning Protection
- Appendix 4 - Enterprise MIBs and Traps
32 Link CX User Manual, Version A
3-7 Radio Link Planning
As described in Section 1-4, each radio link requires one Link CX at each end of the link. Before you
start installing your Link CXs, fill in the following information for both ends of the radio link:
Table 3-3 Radio Link Planning Worksheet
Link CX 1 - High Band Link CX 2 - Low Band
Information Common to Both Link CX Radios
Radio Link Name:
Radio Link Information:
Radio Link Polarization (pick one, must be the same for both): HORIZONTAL VERTICAL
Radio Link Payload (as ordered, must be the same for both): DS-3 Ethernet
Information Unique to Each Link CX Radio
Model Number
(see Link CX Label & Table 1-1)
M1007 _ _ - _ 0 _
(high band)
M1007 _ _ - _ 0 _
(low band)
Antenna Type
(pick one)
Integral
61 cm (2 ft.)
122 cm (4 ft.)
Integral
61 cm (2 ft.)
122 cm (4 ft.)
Radio Link Channel and Band
Center Frequency (pick one pair,
must be different)
Channel 1 High Band,
5.3 GHz: Tx--5.322 GHz/
Rx--5.262 GHz (default)
Channel 1 Low Band,
5.3 GHz: Tx--5.262 GHz/
Rx--5.322 GHz
Channel 2 High Band,
5.3 GHz: Tx--5.338 GHz/
Rx--5.278 GHz
Channel 2 Low Band,
5.3 GHz: Tx--5.278 GHz/
Rx--5.338 GHz
Channel 1 High Band,
5.8 GHz: Tx--5.797 GHz/
Rx--5.737 GHz (default)
Channel 1 Low Band,
5.8 GHz: Tx--5.737 GHz/
Rx--5.797 GHz
Channel 2 High Band,
5.8 GHz: Tx--5.813 GHz/
Rx--5.753 GHz
Channel 2 Low Band,
5.8 GHz: Tx--5.753 GHz/
Rx--5.813 GHz
Transmit Attenuation
(default = Disable)
Enable Disable Enabled Disable
Maximum Transmit Power
(refer to Section 3-6.2)
__ dBm __ dBm
Automatic Tx Power Control
(refer to Section 3-6)
Enable Disable Enabled Disable