User's Manual

2 UltraWAVE Micro BTS Installation and Commissioning Guide, Version B
Chapter 1 - Unpacking and Configuration Verification
1.1 Unpacking and Inspecting
The UltraWAVE Micro BTS is packed with great care, and all containers are
inspected prior to shipment.
Micro BTS components that are shipped separately include:
 Micro subrack assembly
 Power supplies
 Power supply subrack assembly
The Micro subrack assembly includes RF Module(s), processor card, E1 or T1
card, TRX card(s) and the clock module.
Upon receipt of these packages, immediately inspect the outside of the shipping
containers. If there is any visible damage, insist that a representative of the
carrier is present when unpacking the contents.
Carefully inspect the system as it is unpacked. If any damage, such as dents or
broken connections, is noticeable, immediately notify the carrier as well as
Alvarion Customer Service.
Store the shipping containers for future use. If the unit has to be returned for
upgrade or service, the specially designed shipping containers assure adequate
protection for the equipment. If for some reason the containers are not reusable or
if they are misplaced, please contact Alvarion to order new containers.
1.1.1 Unpacking the Cabinet
The UltraWAVE Micro BTS is shipped in a specially designed carton. The cabinet
should remain in the packaging until shipped to its final destination. Use this
procedure to unpack your cabinet.
1 Move the cabinet to a level, well illuminated area.
2 Cut all of the strapping on the outside of the shipping container. See
Figure 1-1.