Specifications

Reference Guide
B-15
Port already configured for Remote Terminal.
This port is already configured for use with a remote terminal.
Port has PVC(s) allocated. No changes allowed.
You cannot deactivate a Frame Relay port with active PVCs.
Port is in use.
You cannot make any changes to an active port.
Port is not active.
You cannot use the Hangup option on an HSU card port in the standby state.
Port is not configured for ASCII.
This port is not configured for ASCII operation.
Port is not configured for TCP/IP.
This port is not configured for TCP/IP operation.
Primary WAN is not operational.
You cannot switch from a redundant WAN port back to a primary WAN port if the primary
port is still not operational.
Profile has to be loaded first.
You cannot use the Dial command in the HSU Card Main Screen without first loading a call
profile.
Profile Id was not found.
Upon using the Load command in the HSU Card Main Screen, you requested a non-existing
call profile from the Interface card.