Specifications

B-14
Reference Guide
Model No.
Running Head
Only one ADPCM redundant in the system.
You cannot make more than one ADPCM a redundant card in the system.
Only one port can be at 128K.
You cannot configure more than one port of the card for 128 kbps.
Only U-slots can be configured.
You cannot use the Configuration option for the P slots, C slots, or I slot of a chassis.
Only w1-1 or w1-2 are supported.
You can use the Configuration option only on WAN ports W1-1 and W1-2.
Parameters are not saved.
You have selected the Main command from the bottom of the screen without first saving your
changes. Press “s” to invoke the Save command first.
Parameters have been saved.
You have made changes to the card and typed “s” to invoke the Save command. (This is a
normal message, it always appears when you type “s” to save changes.)
Performance statistics is not available in slc96.
You cannot obtain performance statistics for a WAN port in the slc96 mode.
Performance statistics not available.
You cannot obtain performance statistics for this card or port.
Phone number must be unique.
The primary phone number on an HSU card must be unique.