Specifications

B-12
Reference Guide
Model No.
Running Head
No d-i mode for this slot.
In a redundant cross-connect system, you cannot assign the drop-and-insert (d-i) mode to the
WAN card in slot W3, which holds the redundant WAN card.
No historical alarms.
You have selected the History command in the Alarm Screen, but no alarms exist in that log.
No more profiles allowed.
You cannot assign more than 16 call profiels to the Interface Card.
No more than 1 ts allowed.
You cannot assign more than one WAN time slot to a FRAD circuit.
No more than 2 ts allowed.
The Frame Relay PVC circuit cannot exceed 128 kbps (two 64 kbps time slots).
No more than one BERT test per BRI card.
You cannot perform more than one BERT test on each BRI card.
No more than two WANs in BERT test are allowed.
You can place only two WAN ports in the BERT test mode simultaneously.
No NFAS for selected switch.
The ISDN office switch does not accept NFS B-channel assignments.
No second net-lb allowed when bw = 115.2 kbps.
You cannot activate more than one network loopback at a time on an SRU card port.
No timeslot(s) specified.
You cannot activate a user card that doesn’t have any WAN time slots assigned to it.