Specifications

B-8
Reference Guide
Model No.
Running Head
FR circuit is not defined.
You cannot assign a user circuit for an undefined Frame Relay PVC.
FR port and DLCI must be unique.
The Frame Relay port and DLCI must form a unique address for each PVC.
FR port is not active.
You cannot activate a PVC on an inactive Frame Relay port.
Group ‘A’ is not allowed for slcd4.
You cannot use trunk group A in the slcd4 mode.
Group already taken.
This group is already assigned.
Illegal address and mask combination.
The combination of IP address and mask numbers you chose is invalid. Change either the IP
address or mask number.
Illegal IP Mask.
The IP netmask number you chose is invalid.
Intf. ID must be uniquely identified.
The ISDN PRI card must have a different two-digit number for each WAN port used for
B-channels.
Invalid character in Node Id.
The only valid characters for a Node ID are alphanumeric characters and the underscore.