Specifications

Reference Guide

7-65

WAN Card PARS Screen

Figure 7-43. System (Main) Cross-Connect Screen in PARS MODE

Figure 7-43 shows the System (Main) cross-connect screen after PARS MODE has been

selected. This screen shows the result of the “

View all

” menu selection. The pars_circuit W/U

field indicates that port #1 of a user card in slot U3 is terminated on WAN 1-1. The TS/BW

column indicates that a single time slot on this port has been allocated. (To determine which

time slot, see the time slot table on the user card screen). The pars_circuit TYPE field will vary

with the user card type (voice or data). For example, terminating the FXS card would cause

“v&s” to be displayed in this column while the HSU card would show “d”.

Node_1 | W1 CSU+CSU Rev A6-2 Ser 00101 | 12-31-99 14:33

CIRCUIT ID W/U TS/BW TEST W/U TS/BW TEST TYPE TC CNV

wp_circuit w1-1 24*64 off w1-2 24*64 off n/a n/a no

wp_circuit w2-1 24*64 off w2-2 24*64 off n/a n/a no

wp_circuit w3-1 24*64 off w3-2 24*64 off n/a n/a no

pars_circuit u3-1 01*56 off w1-1 01*56 off d n/a no