Specifications

Reference Guide
7-63
WAN Card PARS Screen
Table 7-24. WAN Card Test Screen Options Settings and Defaults
PARS must be made aware of the time slot(s) used by Voice cards terminated on a WAN. This
applies whether the WAN is a T1 or E1. The “
sIgnaling
” menu option is used to do this. In
Figure 7-40, PARS has been chosen from the WAN screen menu and then signaling has been
displayed. Time slot #3 has been selected to show that it is in use by the Voice card terminated
on this WAN.
Figure 7-41. Typical E1 WAN PARS Screen
Figure 7-41 shows an E1 WAN PARS screen. For E1 WANs, signaling is always carried on
time slot #16 as indicated by the “
S
”. Time slot #5 has been selected using the “
sIgnaling
”
option to show that it is in use by the Voice card terminated on this WAN.
Parameter User Options Default
PARS MODE yes no no
Node_1 | W1 CEPT+CEPT Rev A6-2 Ser 00101 | 12-31-99 14:33
1
PARS MODE yes
0 1 2 3 4 5 6 7 8 9
1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
F X S
Save | Undo | Refresh | sIgnaling | Main