Specifications

Reference Guide
7-53
WAN Card WAN Card User Screens and Settings
QLTY LP1
This parameter indicates the measure of signal quality correlated to noise margin in loop 1.
Possible readouts are
loss
(no sync), or a number from
1
to
10
, where 10 is the best signal.
QLTY LP2
This parameter indicates the measure of signal quality correlated to noise margin in loop 2.
Possible readouts are
loss
(no sync), or a number from
1
to
10
, where 10 is the best signal.
7.4.9 Adtran E1/HDSL Performance Data
Figure 7-35 shows the Adtran E1/HDSL Performance Data Screen for the WAN-U card. The
screen will display statistics for either Unit 1 (HDSL module 1) or Unit 2 (HDSL module 2),
depending on which one you choose in the HDSL Screen.
Figure 7-35. Typical Adtran E1/HDSL Performance Data Screen
(local 15-minute interval)
Node_1 | W1 H_E1+H_E1 Rev A0-0 Ser 00101 12-31-99 14:33
Unit 1 HDSL Performance (15 Min Interval) *Local*
LOOP 1 LOOP 2
ES SES UAS ES SES UAS STATUS
CUR 0 0 0 0 0 0 T..T..
01 0 0 0 0 0 0 ......
02 0 0 0 0 0 0 ......
03 0 0 0 0 0 0 ......
04 0 0 0 0 0 0 ......
05 0 0 0 0 0 0 ......
06 0 0 0 0 0 0 ......
07 0 0 0 0 0 0 ......
08 0 0 0 0 0 0 ......
09 0 0 0 0 0 0 ......
10 0 0 0 0 0 0 ......
11 0 0 0 0 0 0 ......
12 0 0 0 0 0 0 ......
TOTAL 0 0 0 0 0 0 ......
STATUS: L=LOS R=REVERSED T=TEST
Refresh | Clearregs | 24 Hr | 15 mIn | rEmote | Local | pgUp | pgDn | Main