Specifications

7-48

Reference Guide

Model No.

Running Head

WAN Card User Screens and Settings WAN Card

LOFC

The Loss of Frame Count (LOFC) is the accumulation of the number of times a Loss Of Frame

(LOF) is declared. An LOF is declared after 2.5 seconds of continuous Loss Of

Synchronization (LOS) or OOF condition. An LOF is cleared after no more than fifteen

consecutive seconds without an LOS or OOF condition.

SLIP

A Slipped Second is any second containing one or more Controlled Slips. A Controlled Slip

is the deletion or replication of a DS1 frame by the receiving equipment.

7.4.7 Test Screen

Pressing “

” (

Test

command) in the WAN Card Main Screen brings up the screen shown in

Figure 7-33. From this screen, you can create test situations between WAN cards or between

a single WAN card and data test equipment at a remote site. Table 7-15 lists the actions you

can perform from the bottom line of this screen. Table 7-16 lists the settings controlled on this

screen along with their possible values.

Figure 7-33. Typical WAN Card Test Screen

Node_1 | W1 CEPT+CEPT Rev A6-2 Ser 00101 | 12-31-99 14:33

CEPT CEPT

BERT n/a n/a

SYNC no no

BE 0 0

ES 0 0

SES 0 0

CSES 0 0

OSS 0 0

BER 0.0e+1 0.0e+1

ELAP 0 0

LB STATE llb plb