Specifications

7-34
Reference Guide
Model No.
Running Head
WAN Card User Screens and Settings WAN Card
Table 7-9. WAN HDSL Card Main Screen Actions
Table 7-10 lists the WAN HDSL Card settings on the screen for PairGain T1/HDSL, along
with their possible and default values.
Table 7-10. WAN HDSL Card Option Settings and Defaults
Notes:
1. The “FORMAT” field is for setting the ACFA framer. The options for Format are “d4”
and “esf”. The same Format should be used at both ends of a circuit.
Action Function
Save Saves changes to settings
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (e.g., performance and test data).
Xcon Shows the cross-connect map for each WAN port.
Perf Brings up the Performance Data Screen for the near-end system. See the
Performance Data section of this chapter.
Farstat Brings up the performance data for the far-end system. See the Far-End
Data section of this chapter.
Test Initiates and monitors testing of all WAN card ports. Refer to the Test
section of this chapter.
Hdsl Brings up the PairGain T1/HDSL WAN Screen.
Main Returns to the System Main Screen. If changes are made to settings and
not saved, you will be prompted to save or lose changes.
Parameter User Options Notes Default
STATE stdby actv stdby
MODE xcon xcon
FORMAT d4 esf 1 esf
LINE CODE auto 2 auto
PULSE n/a n/a
LINE LEN 0 0
SLIP LIM 126 138 126
AIS/ALM none none
LINE LB n/a n/a
LOCAL LB off on off
CH LB off clr off
LB ADDR 01-24 01
LB GEN off llb plb nlb off
LB DET w/to off on w/to
ESF/NMS RP none at&t ansi c-fdl c-b7r e-fdl at&t
EER THRHD 10e-4 thru 10e-9 none 10e-4
RDNT RULES none none
GROUP none 1 2 3 4 none