Specifications

Reference Guide
7-29
WAN Card WAN Card User Screens and Settings
Table 7-7. E1 HDSL Screen Actions
Table 7-8. E1 HDSL Screen Option Settings and Defaults
Notes:
1. AIS/ALM will show
none
until the GROUP is selected.
2. The up and down arrow keys are used to scroll through the loopback address values.
3. The Farstat registers will not work properly for E1 operations unless the
c-sa4
option
is selected for the COM/NMS RP parameter.
Action Function
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e., performance and test data).
Xcon Shows the time slot cross-connect map for each WAN port.
Perf Brings up the Performance Data Screen. See the Performance Data section of
this chapter.
Farstat Shows the far-end network register data.
Test Initiates and monitors testing of all WAN card ports. Refer to the Test section
of this chapter.
sWitch Allows you to switch WAN port operations to the redundant (WAN-R) card.
Hdsl Brings up the HDSL Screen described later in this chapter. This command is
shown only for a WAN-U card.
Main Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or abandon your changes.
Parameter User Options Notes Default
STATE stdby actv stdby
MODE xcon xcon
FRAME crc d-frm crc
TS16 cas ccs nos cas
EVEN BIT norm inv norm
AIS/ALM none tcodr 1 none
LINE LB off on off
LOCAL LB off on off
CH LB off clr off
LB ADDR 01-31 (user-selectable) 2 01
LB GEN off llb plb nlb off
COM/NMS RP none c-sa4 c-br7 e-sa4
(c-fdl)
3 none
EER THRHD 10e-4 through 10e-9 none 10e-4
RDNT RULES n/a none OOS CGA 4 none
GROUP none 1 2 3 4 5 none