Specifications

7-20
Reference Guide
Model No.
Running Head
WAN Card User Screens and Settings WAN Card
Table 7-4. T1 CSU and DSX Option Settings and Defaults
Notes:
1. The only valid option for Cross-Connect systems is
xcon
.
2. These options are valid only if you have a CSU and the Line Code is
ami
. If you have
a CSU and the Line Code is
b8zs
, then this setting will default to
n/a
. If you have a
DSX module, then this setting will always default to
n/a
.
3. These options are valid only if you have a CSU. If you have a DSX module, then the
possible options are
0
(default),
133, 266, 399, 533, 655
, and
csu
.
4. The settings for AIS/ALM are affected by the setting of Group.
5. If the format is d4 or slc96, the only option to appear will be
none
.
6. If there is no redundant WAN card in the appropriate slot the only option that will
appear is
n/a
.
7. Selection of GROUP is a two-step process. After identifying the group number (1-4),
the user must select the secondary group (A, B, or C). At which point TCODR will then
become available.
Parameter User Options Notes Default
STATE stdby actv stdby
MODE xcon 1 xcon
FORMAT d4 esf slc96 slcd4 esf
LINE CODE ami b8zs 2 b8zs
PULSE n/a trnsp z15s n/a
LINE LEN 0 7.5 15.0 3 0
SLIP LIM 126 138 126
AIS/ALM none tcodr 4 none
LINE LB off on off
LOCAL LB off on off
CH LB off clr off
LB ADDR 01-24 01
LB GEN off llb plb nlb off
LB DET w/to off on w/to
ESF/NMS RP none at&t ansi c-fdl c-b7r e-fdl 5 at&t
EER THRHD 10e-4 thru 10e-9 none 10e-4
RDNT RULES n/a none OOS CGA 6 none
GROUP none 1 2 3 4 7 none