Specifications

Reference Guide
6-13
Interface Card Interface Card User Screens and Settings
6.3.2 Call Profile Screen
To enter a new call profile, first press “
f
” in the Interface Card Main Screen (
proFiles
command). Then, type
01
for the first new profile to be created. This brings up the Call Profile
Screen shown in Figure 6-8.
Figure 6-8. Typical Call Profile Screen
In the current system software version, you can program up to six call profiles.
Since leading zeros are ignored, the entries
001
,
01
, and
1
all refer to the same call profile. If
the call profile does not already exist, the system will ask if you want to create it now.
Table 6-4 lists the actions you can perform from the Call Profile Screen. Table 6-5 shows the
settings and defaults for each parameter.
PROFILE #001 | IF INf+M T1E1x8 Rev A0-0 Ser 01103 | 12-31-99 14:33
1
D CHAN 01
CALLED #
CALLED # TYPE unkwn
CALLED # PLAN unkwn
CHANNEL RATE 56u
RATE MULTIPLIER 1
IMUX CALL n/a
SERVICE 01 Mast
CALLING #
CALLING # TYPE unkwn
CALLING # PLAN unkwn
PRESENT. INDCTR yes
SCREEN. INDCTR up-ns
BCAST. PHONES no
a
Save | Undo | Refresh | Delete | Main