Specifications

6-8
Reference Guide
Model No.
Running Head
Interface Card User Screens and Settings Interface Card
6.3 Interface Card User Screens and Settings
6.3.1 Interface Card Main Screen
Figure 6-7 shows the Interface Card Main Screen. You must use this screen to define two
timing sources for the card, and then go to other screens for additional setup and information
viewing instructions. To go to the Interface Card Main Screen, highlight that card in the
System Main Screen and press <Enter>.
Figure 6-7. Typical Interface Card Main Screen
The bottom line of this screen shows numerous actions that you can perform from the screen.
To perform an action, simply press the associated capital letter on your keyboard. For example,
to save your option settings, press “
s
” (for
Save
). Table 6-2 lists the available actions.
Node_1 | IF INF+M T1E1x8 Rev A0-0 Ser 01103 |12-31-99 14:33
1
PRIMARY CLOCK int
EXT RATE n/a
EXT FORMAT n/a
EXT FRAME n/a
SECONDARY CLK int
EXT RATE n/a
EXT FORMAT n/a
EXT FRAME n/a
CURRENT CLK int
Save | Undo | Refresh | Time | ACO | proFiles | taBs | Ports | Main