Specifications

5-46
Reference Guide
Model No.
Running Head
Software Download Procedures CPU Card
5.7.3 Pre-TFTP Binary Upload/Download Preparation
To perform binary (bin) uploads/downloads via the TFTP function, one of the following two
methods of connection to a Local Area Network (LAN) must first be selected.
1. The first option requires that the system to which you will download be powered and
running through an active MCC server card that is connected to a LAN. The connection
must be made either in the box that will receive the downloaded file or in a remote box
routed through the local CPU that is set as a gateway using an IP protocol. You must be
able to ping the MCC card and the local and remote CPU host IP addresses from the PC
or server that you intend to use as a TFTP server and vice versa. The DEF RTE on the
MCC Ethernet configuration screen must be set to
static
and must include the IP address
of the PC or server from which you are downloading the firmware. You may need to
change the routing table on your PC to include the MCC ethernet address as the gateway,
or the local host address as the gateway for the system receiving the file as the destination
IP address.
2. The second option is to connect to the Integrated Access System interface card’s COM
(C1) port to which you will download the firmware using PPP or SLIP protocol at 19.2k
or 9.6k respectively. Again, you may need to change the routing table on your PC and/or
on the router or terminal server through which the PPP/SLIP connection runs.
Note:
Your PC must have some sort of TFTP or TFTPD server software installed and
running when you are downloading the binary files to the system. If you are using
TFTPD type software it is easier if you set the root directory to indicate where the
binary file is located at the TFTPD root screen. This eliminates the need to enter a
path at the file name screen during the download process. If you are running a TFTP
software package, consult the user guide accompanying the software for details on
configuring and using the software.
5.7.3.1 TFTP or TFTPD Protocol Bin Download
Follow the steps listed below to perform a TFTP or TFTPD protocol bin download.
1. Establish connection in one of the following methods:
•
Connection via Telnet
•
Direct connection to the Integrated Access System, using the SLIP/PPP connection
via the computer port
•
Connection through the MCC card, using the TFTP or TFTPD protocol
2. Log into the Integrated Access System using the
Superuser
password.
3. Highlight the appropriate CPU with the cursor and press “
P
”.