Specifications

5-18
Reference Guide
Model No.
Running Head
TCP/IP Network Management CPU Card
5.4.1 Network Statistics Screens
The Network Statistics Screens provide maintenance and diagnostic information for the
different protocols supported by this equipment. The system starts accumulating statistics
when the TCP/IP Port is changed from
off
to
local
or
wan
, and it continues to store
information until it is turned off.
Figure 5-9 shows the first of four Network Statistics Screens, and Figure 5-10 through Figure
5-12 show the other three screens. To go to the first screen, press “
n
” in the TCP/IP Screen to
choose
Netstat
from the bottom line of that screen. Table 5-6 lists the actions that can be taken
from the Network Statistics Screens, and the following paragraphs describe the parameters in
each screen.
Figure 5-9. Typical Network Statistics Screen, Page 1
To move from one screen (page) to another, press “
d
” (
pgDn
) or “
u
” (
pgUp
). Pressing “
d
”
goes to the next-highest page number. If you are on Page 4 when you press “
d
”, you will wrap
around to Page 1. Pressing “
u
” goes to the next-lowest page number. If you are on Page 1 when
you press “
u
”, you will wrap around to Page 4.
Node_1 | C1 CPU-5 XCON Rev C3-0 Ser 01103 | 12-31-99 14:33
NETSTAT Page 1 of 4
SLIP
MTU Size 240
Bytes Received 0
Packets Received 0
Packets Discarded 0
Packets Dropped - buffer 0
Buffer Overflow 0
Packets Sent Out 0
Bytes Sent Out 0
FDL
MTU Size 240
Frames Received 0
Frames Aborted on Receive 0
Frames To Transmit from Above 0
Frames Transmitted 0
Frames Aborted on Transmit 0
pgUp | pgDn | Refresh | Main