Specifications

5-16
Reference Guide
Model No.
Running Head
TCP/IP Network Management CPU Card
DEFAULT IP UNIT
The Default IP Unit (Figure 5-8) options are determined by the choice of Default IP Port. If
off
or
local
is selected for that parameter, this option will show
n/a
. If
wan
is selected above,
the options for this parameter will be
1-2
(corresponding with the WAN port). If
nX64
is
selected above, the options for this parameter will be
C1
,
C2
,
C3
and
C4
.
Figure 5-8. CPU Default IP Unit Selection Screen
RPT1 IP ADDR
The RPT1 IP Address is the IP address of the first Network Management System host running
an SNMP trap server.
Node_1 | C1 CPU XCON Rev XA-0 Ser 00009 | 12-31-99 14:33
*1
HOST IP STATE
HOST IP ADDR
HOST NETMASK
HOST TYPE
actv
199.190.214.2
255.255.255.0
host
DEFAULT IP PORT nx64
DEFAULT IP SLOT n/a
DEFAULT IP UNIT C1
RPT1 IP ADDR 199.190.213.1
RPT1 COMMUN STR public
RPT2 IP ADDR
RPT2 COMMUN STR
RPT3 IP ADDR
RPT3 COMMUN STR
C1 C2 C3 C4
Ping | Netstat | rOute | Save | Undo | Refresh | nX64 | Main