Specifications

4-88
Reference Guide
Model No.
Running Head
Checking the Time Slot Map System Configuration and Operation
4.22 Checking the Time Slot Map
Once you select and assign the time slots, you can view the list of DS0 connections (the time
slot map) through the WAN card Cross-Connect Screen for cross-connect systems. You can
see the results of your assignments in the time slot map as follows:
1. From the Main Screen, select the WAN card in slot W-1.
2. Type “
x
” (
Xcon
) to bring up the time slot screen (see Figure 4-60 for T1 operation and
Figure 4-61 for E1 operation).
3. Selecting “
m
” (
Main
) to return users to the WAN card Main Screen.
4. Selecting “
m
” (
Main
) again will return users to the Main System Screen.
Figure 4-60. Typical Time Slot Screen for T1 Operation
Node_1 | W1 CSU+CSU Rev A6-2 Ser 00101 | 12-31-99 14:33
TS XCON TS CIRCUIT ID TS XCON TS CIRCUIT ID
1 u2-1 D-01 user_circuit 13
2 u2-1 D-02 user_circuit 14
3 u2-1 D-03 user_circuit 15
4 u2-1 D-04 user_circuit 16
5 u2-1 D-05 user_circuit 17
6 u2-1 D-06 user_circuit 18
7 u2-1 D-07 user_circuit 19 u2-1 A-01 user_circuit
8 20 u2-1 A-02 user_circuit
9 21 u2-1 A-03 user_circuit
10 22 u2-1 A-04 user_circuit
11 23 u2-1 A-05 user_circuit
12 24 u2-1 A-06 user_circuit
Save | Undo | Refresh | Main