Specifications

Reference Guide
4-87
System Configuration and Operation Using the Broadcast Option
Table 4-8. TLA Circuit State Screen Menu of Actions
Action Function
moNitor The Monitor command allows the user to create a monitor circuit at the
WAN interface. See section above.
spLit The Monitor command allows the user to create a split circuit at the WAN
interface. See section above.
Release The Release command allows the user to release and restore a split circuit or
a monitor circuit. See section above.
Tla The Terminate and Leave Access (TLA) command is the capability to
terminate one or both directions of transmission on a circuit. See section
above.
pgUp The pgUp (Page Up) action is initiated by pressing the "u" key. Since the
system can handle many different TADS circuits, you may fill the screen
allotment for data. New pages will be added automatically to accommodate
additional circuits. Use this command to scroll up through the pages of
TADS information.
pgDn The pgDn (Page Down) action is initiated by pressing the "d" key. This
action is similar to the pgUp command. Use this command to scroll down
through the pages of cross-connect information.
Main Pressing "m" (Main) will return you to the cross-connect screen.