Specifications

4-72
Reference Guide
Model No.
Running Head
Using the Broadcast Option System Configuration and Operation
Figure 4-46. Typical Add Broadcast Screen
In this example, the broadcast circuit is named "Lecture" for easier identification later, when
the circuit will be disconnected.
Figure 4-46 shows the selection of a second destination for the broadcast circuit. In that
example, that destination is Salt Lake City, which is accessed through
w2-1
. The time slot
selection is shown in Figure 4-46. Press "
s
" (
Save
) to save the parameters of the new circuit.
Figure 4-49 shows the new circuit, whose type is
b/d
(broadcast/data).
Use similar actions to duplicate this circuit for the other destinations. Figure 4-47 shows the
completed circuits.
To disconnect the circuits when the program is finished, highlight the circuit to be
disconnected and press the "
e
" key. The screen shown in Figure 4-51 will appear. Then, select
"
y
" to permanently delete the copied circuit while leaving the original circuit intact.
Node_1 | C1 CPU XCON Rev A0-0 Ser 00101 | 12-31-99 14:33
page: 1 of 1
CIRCUIT ID W/U TS/BW TEST W/U TS/BW TEST TYPE TC CNV
user_circuit w4-1 06*56 off w1-1 06*56 off d n/a n/a
user_circuit w4-2 06*56 off w2-2 06*56 off d n/a n/a
SF-SLC w1-1 01*64 off w2-1 01*64 off v n/a no
HST-PHX w1-2 01*64 off w2-2 01*64 off v n/a no
user_circuit w4-1 06*56 off w1-1 00*56 off b/d n/a no
Lecture
Save