Specifications

Reference Guide
4-71
System Configuration and Operation Using the Broadcast Option
Figure 4-45. Typical All Circuits Screen
In addition to the two WAN-to-WAN cross-connects shown in Figure 4-44, an HSU circuit
from slot U4-1 to the San Francisco T1 circuit (on WAN 1-1), and an HSU circuit from slot
U4-2 to Phoenix (on WAN 2-2) are shown in Figure 4-45.
To select the broadcast option, place the cursor over the User card circuit that will be copied.
In this case, it will be the Denver end of the Denver-to-San Francisco link on WAN 1-1. Then,
press the "
b
" (
Bcast
) key from the actions at the bottom of the screen.
The screen of Figure 4-45 shows the dynamics of the first copy of that circuit. Press the
<Enter> key to access and modify the connection options.
Node_1 | C1 CPU XCON Rev A0-0 Ser 00101 | 12-31-99 14:33
page: 1 of 1
CIRCUIT ID W/U TS/BW TEST W/U TS/BW TEST TYPE TC CNV
user_circuit
w4-1 06*56 off w1-1 06*56 off d n/a n/a
user_circuit w4-2 06*56 off w2-2 06*56 off d n/a n/a
SF-SLC w1-1 01*64 off w2-1 01*64 off v n/a no
HST-PHX w1-2 01*64 off w2-2 01*64 off v n/a no
Bcast | uPdate | dElete | pgUp | pgDn | Main