Specifications

Reference Guide
4-53
System Configuration and Operation Cross-Connecting WAN Time Slots
Figure 4-30. Test Options
W/U
The second WAN Unit column is the T1/E1 link in which the pass-through connection ends.
The options are all of the WAN cards and ports. If a WAN card is not present in the W/U
selected, an error message is generated. Figure 4-30 shows the selection of W 3-2.
TS/BW
The second Time Slot/Band Width column shows the different time slots from WAN 3-2 that
will be assigned to this pass-through connection. Figure 4-30 shows the selection of 5 time
slots from WAN 3-2 assigned to the end of the connection. Any number of time slots from
1-24
would be accepted for T1 operations and from
1-15 and 17-31
for E1 operations. The
bandwidth is automatically assigned.
Node_1 | C1 CPU XCON Rev A0-0 Ser 00101 | 12-31-99 14:33
page: 1 of 1
CIRCUIT ID W/U TS/BW TEST W/U TS/BW TEST TYPE TC CNV
SF01-NY01 w1-1 05*64
off w1-1 00*64 off d n/a n/a
off all 0 all 1 m_oos 1:1 1:7 lpbk 300Hz 1KHz 3KHz
Save