Specifications

Reference Guide
4-51
System Configuration and Operation Cross-Connecting WAN Time Slots
uses the same convention (
w1-1, w1-2, etc
.) seen earlier. If a WAN card is not present in the
W/U selected, an error message is generated. The example in Figure 4-28 shows
w1-1
(WAN
1, port 1) as the selected WAN card and port.
Figure 4-28. WAN Unit Options
TS/BW
The first Time Slot/Bandwidth column shows the different time slots of
w1-1
that will be
assigned to this pass-through connection. Figure 4-29 shows the selection of time slots 8 to
time slot 12 of
w1-1
assigned to the start of the connection. Any number of time slots from
1
to
24
is allowed for T1 transmission. Or, time slots
1
to
15
and
17
to
31
are allowed for E1
operations.
The bandwidth is automatically assigned.
Make your selection by using the space bar and arrow keys. The arrow key moves from slot
to slot, and the space bar toggles between selecting and deselecting a time slot.
Node_1 | C1 CPU XCON Rev A0-0 Ser 00101 | 12-31-99 14:33
page: 1 of 1
CIRCUIT ID W/U TS/BW TEST W/U TS/BW TEST TYPE TC CNV
SF01-NY01
w1-1 00*64 off w1-1 00*64 off d n/a n/a
w1-1 w1-2 w2-1 w2-2 w3-1 w3-2 w4-1 w4-2
Save