Specifications

4-50
Reference Guide
Model No.
Running Head
Cross-Connecting WAN Time Slots System Configuration and Operation
WARNING!
When cross-connecting multiple independent data DS0 time slots (sequentially grouped time
slots should work) for data. Super-rate [data type cross-connect] is multiple DS0’s sequentially
assigned between WAN aggregates in a cross-connect system. DO NOT attempt to save time
by cross-connecting independent data time slots as one super-rate circuit (could cause data
errors.) This limitation does not apply to voice time slots.
Figure 4-27. New Circuit Selection and ID Assignment
W/U
The first WAN Unit (W/U) column is the T1/E1 link in which the pass-through connection
begins (since these circuits are bi-directional, the concept of beginning or ending is used for
illustrative purposes only). The options are all WAN cards and ports, and the identification
Node_1 | C1 CPU XCON Rev A0-0 Ser 00101 | 12-31-99 14:33
page: 1 of 1
CIRCUIT ID W/U TS/BW TEST W/U TS/BW TEST TYPE TC CNV
new_circuit w1-1 00*64 off w1-1 00*64 off d n/a n/a
SF01-NY01
Save