Specifications

Reference Guide

4-39

System Configuration and Operation Assigning Time Slots

Figure 4-17. Typical E&M Card Time Slot Assignments

4.16.2 Assigning Multiple Time Slots to a Port

Figure 4-18 shows the HSU Card Main Screen for the time slot assignment example. Assign

time slots to this card as follows:

1. From the Main Screen, select the desired HSU card and press <Enter>.

2. Select the WAN port to which you want to assign the HSU port. In Figure 4-18, this port

W1-1

(for WAN 1, port

1).

3. Select the TS table. All time slots of the selected WAN port appear at the bottom of the

screen. These are 1 to 24 for a T1 port, or 1 to 31 for an E1 port.

Node_1 | U1 E&M 4Wx8ER Rev A2-0 Ser 01103 | 12-31-99 14:33

1234567 8

STATE actv actv actv actv actv actv actv actv

WAN/SRV w1-1 w1-1 w1-1 w1-1 w1-1 w1-1 w1-1 w1-1

TS 01 02 03 04 05 06 07 08

MODE e&m e&m e&m e&m e&m e&m e&m e&m

R2 TYPE n/a n/a n/a n/a n/a n/a n/a n/a

RX TLP 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

TX TLP 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

CODING u-law u-law u-law u-law u-law u-law u-law u-law

TC CGA idle idle idle idle idle idle idle idle

LB off off off off off off off off

PATTRN none none none none none none none none

HYBRID n/a n/a n/a n/a n/a n/a n/a n/a

SIG CONV off off off off off off off off

RATE 64k 64k 64k 64k 64k 64k 64k 64k

ADPCM n/a n/a n/a n/a n/a n/a n/a n/a