Specifications

Reference Guide
4-35
System Configuration and Operation System Level Maintenance
5. From the Terminal Emulation Screen Menu select
Send Text File.
The system prompts
for the filename and path. Following entry of appropriate information, the restore process
begins. If a
process completed
message appears immediately following the start of the
process, an error has occurred. If this happens, check to ensure that the file being sent to
the system includes a
.TXT
extension.
6. Upon completion of restoration, the system prompts you to
press ESC twice
. The system
then reboots itself.
7. Following reboot, press
“Y”
for
Yes
when prompted. The system configuration
information should be restored.
4.12.10 XMODEM 128k and XMODEM 1k Backup
Follow the steps listed below to perform an XMODEM 128k or XMODEM 1k backup. (Note
that XMODEM 128k is slower than XMODEM 1k.)
1. Log into the Integrated Access System on which the backup is to be performed.
2. Press
“Y”
for
System
at the main menu.
3. When the Test and Debug screen appears, press
“B”
for
Backup.
4. The NV Ram Backup screen next appears. Using the arrow keys to navigate the cursor,
highlight the
Protocol
selection and press
Enter.
5. Select
Flash
using the arrow keys and press
Enter
(NV Ram must be backed up to Flash
before proceeding with TFTP or XMODEM backups).
6. Press
“G”
for
Go
. An NV Ram image overwrite command confirmation appears (i.e.,
Previous NV image, cksum: ox2DF05, date 09-08-96 05:58 overwrite (y/n)?
) Enter
“Y”
for
yes.
7. A confirmation appears upon completion of the NV Ram backup to flash. Press
Enter
as
prompted on the screen.
8. Prior to starting the backup or restore process, ensure that have the PC emulation package
is set to the XMODEM or XMODEM1K type format, otherwise an error will occur during
the process. XMODEM backup is now ready to proceed.
9. Select XMODEM 128k or XMODEM 1k by highlighting
Protocol
using the arrow keys.
Press
Enter
when the XMODEM protocol to be used is highlighted.
10. To begin backup, press
“G”
for
Go
and press
Enter.