Specifications

4-34
Reference Guide
Model No.
Running Head
System Level Maintenance System Configuration and Operation
10. Following completion of the restoration process, the system will prompt to restore data
with the image that was uploaded. Press
“Y”
for
yes
.
11. The system asks to reboot. Press
“Y”
for
yes
. The system reboots and configuration
becomes active.
4.12.8 ASCII Backup Procedure
Following the steps listed below to perform an ASCII backup.
1. Log into the Integrated Access System.
2. Press
“Y”
for
System
at the main menu.
3. At the Test and Debug screen press
“B”
for
Backup.
4. The NV Ram Backup screen appears. Using the arrow keys to navigate the cursor,
highlight the
Protocol
selection and press
Enter
.
5. Using the arrow keys highlight
‘ascii’
(ASCII is the normal default selection) and press
Enter.
6. Prior to starting the backup and restore process you must set the terminal emulation
package to XMODEM1K or XMODEM, otherwise the process will fail.
7. From the Terminal Emulation window select
Capture Text File
. The system will prompt
for the desired filename and path to store the backup file. Following entry of this
information press
Enter
.The filename must include
.txt
as an extension or the backup will
not function properly.
8. From the NV Ram Backup screen press
“G”
for
Go
. The Integrated Access System begins
transferring the configuration to a text file. Upon completion, the system prompts you to
enter
“m”.
You must first select
Capture Text
from the Terminal Emulation Menu and
select
Stop
. You may then proceed with pressing
“m”.
4.12.9 ASCII Restore Procedure
Following the steps listed below to perform an ASCII restore.
1. From the main menu press
“Y”
for
System.
2. Press
“E”
for
Restore.
3. Select “
ascii
” from the
Protocol
selection using the arrow keys to navigate. Press
Enter
.
4. Press
“G”
for
Go.