Specifications

Reference Guide
4-31
System Configuration and Operation System Level Maintenance
4.12.3 Debugging the System
The
D
(Debug) command is only available to factory personnel with a password authorization
higher than "Superuser." It gives access to the system software coding.
4.12.4 Registering the System
The
R
(Registration) command allows a user with Operator or higher password authority to
change the system registration. The original registration is explained earlier in this chapter.
You must have this information to properly re-register the system.
Do not use this command
during normal system operation.
The registration procedure consists of three steps. First, you must enter the vendor code. Then,
you must select the type of chassis used. Finally, confirmation of the proposed changes is
required (
Y
= yes,
N
= no).