Specifications

Reference Guide
4-19
System Configuration and Operation Reinitializing the System
Figure 4-11. Cold-Start NVRAM Test Screen.
WARNING!
The "Z" command will start the ZIP process. "Zipping" the system deletes all of the
information stored on NVRAM and resets it. All cards must then be completely reconfigured.
When you press “
z
”, the system will display the main log-in screen and ask for password
authorization from either the Manager or Operator access level. After you enter the correct
password, the system asks, "OK to Zip the system (y/n)"? Press “
y
” to have the system test
and re initialize itself. All NVRAM information will be erased from the Interface card, and a
new log-in screen will appear.
*** Xconnect has been changed ***
Press ‘Z’ to zip the System
Zip | Debug | Reg | Main