Specifications

Reference Guide
4-5
System Configuration and Operation System Initialization
8. Select the type of chassis used (front-loading with power supplies on the side,
front-loading with power supplies on top, or front/rear loading with power supplies on the
side).
9. If the vendor code and chassis types selection are both correct, type
Y
to confirm and
save that data. Otherwise, type
N
to return to the screen for changes.
The system now automatically restarts with the correct application parameters. Proceed to the
next section, log into the system, and start configuring it for operation.
Figure 4-4. Selecting Chassis Type Screen
unknown | Welcome to Registration | 12-31-99 14:33
Vendor Code: 000
System Package:
1. Front-Loading Only / Power Supplies on side
2. Front-Loading Only / Power Supplies on top
3. Front & Rear Loading / Power Supplies on side
Select one: 3
Is the information on this screen correct (Y/N)?