Specifications
4-2
Reference Guide
Model No.
Running Head
System Initialization System Configuration and Operation
4.3.1 Registration
To register your system after starting it up for the first time, proceed as follows:
1. Be sure your system and local terminal are both powered up.
2. Connect a VT100-compatible terminal to the TERM jack on the Interface card front
panel. Use a cable with an RJ-48 modular plug on one end for this connection.
3. Configure the terminal to operate at 9.6 kbps, 8 data bits, no parity, and 1 stop bit.
4. Press the RETURN key. The Registration Screen in
Figure 4-1
appears.
Figure 4-1. First Time Registration Screen
5. Press “
R
” to update Registration.
*** Missing Registration Data ***
Press ‘R’ to update Registration
Zip | Debug | Reg | Backup | rEstore | Main