Specifications

Reference Guide
4-1
System Configuration and Operation Basic Operations
Chapter 4
System Configuration and Operation
4.1 Basic Operations
This chapter provides instructions for configuring the integrated access system for operation
after installing it at the equipment site.
Before performing the procedures in this chapter:
1. Be sure your integrated access system is installed and powered up.
2. Determine your system’s specific configuration requirements. These depend on your
network and customer premises equipment (CPE) interfaces. If this configuration
information already exists, obtain it from your system administrator or engineers.
3. Obtain a terminal with VT-100 or VT-102 emulation and an RS-232 to RJ48 cable for
these procedures. The terminal will be connected directly to the TERM port on the
Interface card in your system. It allows you to access the system and then configure it for
operation with your network and CPE.
4.2 Basic Screen Map and Legend
To make system access, configuration and testing easy, the system presents you with a series
of user interface screens. Each screen displays various fields of information, and you can
change the data in those fields as required by your system and external interfaces.
4.3 System Initialization
System initialization consists of registering your system then logging into it for additional
configuration. These operations are described on the following pages.