Specifications

WARNING!
This equipment has been tested and found to comply with the limits for a Class
"A" Digital Device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy, and, if not installed
and used in accordance with this Reference Guide, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at their own expense.
The authority to operate this equipment is conditioned by the requirement
that no modifications will be made to the equipment unless the changes or
modifications are expressly approved by the manufacturer.
Disclaimer for Shielded Cables
This equipment was tested with shielded input/output and interface cables. It is recommended
that shielded cables be used to reduce interference whenever interference is suspected.
Panel and Cover Removal
Only qualified service technicians should attempt the removal of covers and panels.
Notice!
Never attempt to operate the equipment with the power panel fasteners
removed. Do not remove power panel covers without first disconnecting the
input power.
Power Source
Please refer to
Appendix A, System Standards and Specifications
in the System Reference
Guide regarding System Requirements.