User guide

BASIC FUNCTIONALITY

PAUSE TV

Thanks to “Pause TV”, you can pause a program, have a several-minute break and resume watching without missing a single second.

To be able to use the “Pause TV” functionality choose an appropriate USB Memory Stick (at least 1GB) and plug it on the back panel

of your decoder. Then, the formatting process of the USB Memory Stick starts. It may last several seconds. If your USB Memory Stick

proves to be too slow, you can still use it but the quality of playback may not be satisfactory.

Once the Memory Stick has been prepared, press to activate Pause TV (recording). To resume watching press . You can also

pause, fast-forward, rewind within the recorded content (see Remote Control).

Time of “Pause” mode depends on the capacity of your USB Memory Stick and the broadcast quality.

When “Pause TV” is turned off by pressing or on channel change, the whole recorded content is lost.

While in “Pause TV” mode a banner appears as presented below:

Mode icon indicates

the current state of the

Pause TV.

Time-Shift shows how much

time behind the live program

you are. “-12m18” means that

you are 12 minutes and 18

seconds behind the live video.

Gray bar shows how much

recording space for live

broadcast is still free.

Blue bar shows how

much recording space for

live broadcast is taken.

Slider shows which part

of the program you are

watching now.

Do not remove the

USB memory device

when you are using

Pause TV.