User guide
PV100 Power Bank User’s Manual
Overview
Product Features
PUSH
ON/OFF
PUSH
ON/OFF
8mm thickness Power indicator
Power / Indicator button
MicroUSB
Input
Output
●
 Six layers of circuit protection (overcharge protection / over-discharge protection / 
 over-temperature protection / short circuit protection / over voltage protection / 
 over-current protection)
●
 Slim design of only 8mm thickness
●
 2.1 Ampere output for fast charging
●
 Fast charging recognition of most mainstream handheld devices.
●
 LED power indicator
Specifications
●
 Battery capacity: 4200mAh (Lithium polymer rechargeable battery 15.54W)
●
 Rated voltage: Input 5V DC/1A (Micro-USB)
  Output 5V DC/2.1A (Type-A USB)
●
 Charging time: 4~6 hours
●
 Dimensions: 67 x 118 x 8mm / 2.6 x 4.6 x 0.3in
●
 Weight: 105g / 3.7oz
Note: Rated capacity for this product is: 2907mAh (14.535 Wh)
Power Display
Press Power ON/OFF to display the power status.
Indicator Status
Light on
Flashing
Power display
1. Power bank is charging
2. Low battery warning
Dim light Standby / Charging / No power
PUSH
ON/OFF
PUSH
ON/OFF
PUSH
ON/OFF
PUSH
ON/OFF
PUSH
ON/OFF
25%
50%
75%
100%
Operation
Charging your handheld device
Use USB output for charging 
Discharging
(Output)
●
 Press and hold the power switch for 2 
 seconds to begin charging of the mobile 
 device.
●
 The power bank will automatically shut 
 down after 5 minutes of non-use, to save 
 power.
PUSH
ON/OFF
PUSH
ON/OFF
Charging
(Input)
Charging the power bank
The LED will automatically start to blink 
while the power bank is charging.
Charge through a computer or other device 
that supplies USB power.
Cautions
 1. Use either the microUSB cable that comes packaged with this product, or a 
 high-performance USB travel charging cable.
2. Do not leave this product in an enclosed vehicle. Extreme heat and sunlight may 
 damage the power bank.
3. Do not expose the product to high temperatures or humid environments.
4. Do not insert metal or foreign objects into the product, 
 so as to avoid short-circuits and damage.
5. Do not disassemble, damage, jolt, or burn the product. Do not subject it to heavy 
 weight.
6. Do not arbitrarily discard this product; recycle used batteries in accordance with local 
 laws.
7. If not used long-term, charge the device once every three months in order to maintain 
 the battery lifespan.
Warranty
ADATA warranty policy applies to all customers who purchased ADATA products through 
authorized agents.
ADATA provides replacement or repair services for defective products within the 
applicable warranty period.
Please note that ADATA is not responsible for providing free repairs if the product defect 
is caused by any of the following factors:
( 1) Damage caused by natural calamity or any inappropriate usage.
(2) Product has been repaired or taken apart by unauthorized technicians.
(3) The warranty label is altered, damaged or missing.
(4) Product serial number does not conform to our original system or the label has been 
 damaged.
(5) Products purchased from unauthorized agents. This limited warranty covers only 
 repairs or replacements of ADATA products. ADATA is not liable for any loss of data 
 or any cost incurred from determining the source of system problems, removing, 
 servicing or installing ADATA products.
For more information, visit the ADATA website www.adata-group.com/login 
Recycle old batteries properly
EN

