Quick Start Guide

To reduce the risk of ﬁre or burns, do not disassemble, crush,

puncture; do not short external contacts; do not dispose of in ﬁre or water.

Warning:

Never attempt to disassemble or reassemble. Risk of explosion if battery is incorrectly replaced.

Replace only by the manufacturer with the same type used by the manufacturer.

Danger:

This device may interfere with the operation of some pacemakers, hearing aids or other medical devices.

To reduce the risk, maintain a separation distance of 20 cm (8 inches) between the device and the

medical device. Refer to the medical device instructions or your doctor for additional information.

Additional Medical Precautions:

Modiﬁcation of the wireless solution, thermal solution, device components or enclosure shall violate

regulatory compliance requirements and may induce safety hazards.

Modiﬁcations:

This device is intended for use in ambient temperatures between 0 ˚C and 30 ˚C (32 ˚F and 86 ˚F).

Avoid using or storing next to heat sources, in direct sunlight, or outside the intended temperature

ranges to avoid damages.

Operating Temperature:

Using a non-approved AC adapter other than the one provided with the device may result in risk of

electric shock, ﬁre, or burn. For Indoor use only and in dry locations. Device must only be repaired by

a professional. Do not open the enclosure. The adapter is rated for use between 0 °C and 35 °C

(32 °F and 95 °F). Connect only to a properly wired and grounded outlet. 20V, 3.25A, 65W.

AC Power Adapter:

Your Laptop is equipped with a Windows Precision Touchpad.

A double-tap on the upper-left corner will toggle on or off your touchpad’s

functionality to avoid accidental touches.

NOTE: When the touchpad is

disabled the LED indicator will

turn on.

Safety and Caution InformationUsing Your Touchpad

1211

Left and right buttons are embedded, under the touchpad on the bottom left and right side, press on each side to activate the

designed function.

Left Right