Quick Start Guide
R33A23
RoHS
使用過度恐傷害視力
（1） 使用30分鐘請休息10分鐘。
（2） 未滿2歲幼兒不看螢幕, 2歲以上每天看螢幕不要超過1小時。
台灣Ro
HS相
關資訊,請造訪:
Taiwan RoHS : www.adata.com/rohs/
Improper use may cause explosion or the leakage of flammable liquid or gas.
Do not replace with an incorrect type of battery that can defeat a safeguard. Do not dispose the battery
into fire or a hot oven, or mechanically crush or cut the battery. Do not leave the battery in an extremely
high temperature surrounding environment. Do not place the battery under extremely low air pressure.
CNC xxxxxx
Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR
limit set by the EN standard is 2.0 W/kg(10g). Testing for SAR is conducted using standard
operating positions accepted by the EN standard. During testing, the radio is set to its highest
transmission levels and placed in positions that simulate use against the body.
Este produto contém a placa Intel® Wi-Fi 6 (AX201NGW) código de homologação
ANATEL 06970-18-04423
53 54
單元Ｕnit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr
+6
)
多溴聯苯
Polybrominated
biphenyls
(PBB)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
機構件 ○ ○ ○ ○ ○ ○
印刷電路板 － ○ ○ ○ ○ ○
液晶顯示屏 ○ ○ ○ ○ ○ ○
揚聲器 ○ ○ ○ ○ ○ ○
風扇 － ○ ○ ○ ○ ○
鏡頭 ○ ○ ○ ○ ○ ○
其他 ○ ○ ○ ○ ○ ○
備考1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the
restricted substance exceeds the reference percentage value of presence condition.
備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the
percentage of reference value of presence.
備考3.〝－〞係指該項限用物質為排除項目。
Note 3：The “－” indicates that the restricted substance corresponds to the exemption.
<限用物質含有情況排除項目說明>
單元 說明
印刷電路板 該部件符合CNS15663附錄D中的D.13(鉛)排除項目
風扇 該部件符合CNS15663附錄D中的D.13(鉛)排除項目
México
La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.