User`s manual

ADX-32B / ADX-64B-PRO
6.3. ADAT 5-8 (ADX-64B-PRO only)
The transmission direction (TX or RX) for channels 5-8 must be set using the DIP switches 1-4
(see 6.2. ADAT 1-4).
6.4. MIDI1
The transmission works by injecting MIDI data into the ADAT1 signal the input ADX, and extracting it at the
output ADX. This means that:
 MIDI transmission works only when a valid ADAT signal is present on ADAT1
 The direction of MIDI transmission is always the same as the direction of ADAT1 and is selected with the same
DIP switch.
 When MIDI is set to input, unaltered MIDI data is also looped back to the “OUT/THRU” jack, allowing the
connection of additional MIDI equipment.
6.5. MIDI2 (optional in ADX-64B-PRO)
Works like MIDI1, except that ADAT5 is used for data transmission.
9
8765
MIDI2
Cat5 Connection 1
IN OUT/THRU
IN
OUT/THRU IN OUT/THRU IN OUT/THRU IN OUT/THRU
IN
OUT/THRU
Cat5 Connection 2
OUT
CH5/WC/MIDI
OUT CH6 OUT CH7 OUT CH8
75Ω WC TERM
MULTI CH5 MODE
IN IN IN IN
OFF
WC
1 2 3 4 5 6
ON