User`s guide

ADASH Ltd. Adash 3600-MAIN-COM-PWR
ADASH Ltd., Czech republic, tel.: [phone], fax: [phone], email: [e-mail]
For next technical and contact information visit www.adash.net, www.adash.cz
3
Before the First Start-up
1. Never connect any sensor to the ICP input of the unit other than the ICP sensor type!
If you are not sure, consult the procedure with your supplier.
2. Never connect the unit directly to the mains voltage!
3. Use only power supply units with a maximum
nominal voltage of 5 V DC to supply the unit!
4. Use only power supply units with a maximum
nominal voltage of 30 V DC to supply current
loops and binary inputs!
5. Pay attention to the correct polarity of the supplied voltage!
Failure to respect any of the following recommendations may damage the device!
With a non-professional handling of voltage exceeding 24 V you expose yourself to
accident hazard.