User`s guide

ADASH Ltd. Adash 3600-MAIN-COM-PWR
ADASH Ltd., Czech republic, tel.: [phone], fax: [phone], email: [e-mail]
For next technical and contact information visit www.adash.net, www.adash.cz
14
Indicator Signals
------------------------------------------------------------------------------------------------
O.K. no set limit has been exceeded (the OK relay closed)
ALERT the ALERT limit exceeded, the ALERT relay closed
DANGER the DANGER limit exceeded, the DANGER relay closed
Indication of the BIN Input Signals Condition
The binary signals condition is indicated by the indicators in the PROCESS box.
Indicator Signals
-----------------------------------------------
1 signal BIN1 active
2 signal BIN2 active
3 signal BIN3 active
4 signal BIN4 active
Unit State Indication
The unit state is indicated by the indicators in the STATUS box.
Indicator Signals
--------------------------------------------------------------------------------------------------------------------------------------
E - ERROR unit error, the SYSTEM relay is open, detected error is displayed
M - MEASURE the signal is being measured
T - TRIGGER the unit is waiting for measurement trigger signal
C - COMM communication of the unit with the connected system (data transmission between the
modules of the set)
S - SETUP the unit measurement parameters are being set up