User guide

iGuard/inSight User Guide
Release 7.0.0.4
51
After you Apply the case, the Case List launches, showing you that the case has been added to
the list.
Note: You can customize columns for your cases if you want to change the configuration of the
information.
Create a Case
Cases are most easily created directly from the Incident List. But you may want to create an empty
case to notify a colleague that an investigation must be started on a certain matter.
1. Go to Case > Actions > New Case.
2. Assign the case and make some notes to advise the new owner on what needs to be
done.