User guide

iGuard/inSight User Guide
Release 7.0.0.4
167
Note: It takes a few minutes to register the device.
The Registration icon shows that registration is in progress.
7. Before registration begins, a message is launched stating that all rules, policies,
DHCP servers and IP aliases will be deleted from iGuard before it is registered.
Confirm that you want to proceed, or cancel the process.
8. When registration is complete, the Status icon will change to green and the other
columns will display data.
9. Verify that the device has been added to the list.
View Active Devices
To see the devices that are controlled by the inSight Console, go to System > System Monitor.
De-register a Device
You may need to remove one of the Reconnex devices from the network. If so, you must let the
inSight Console know that the device is no longer resident on the system.
1. Go to System Monitor.
2. Find the device to be de-registered.
3. Select More from the Advanced column.